Löytyi 57 osumaa haulle Systeemitekniikka, 2009, järjestettynä julkaisutyypin mukaan.
Kirja
- Jani Kaartinen,
Machine vision in mineral concentration - Measurements, control, applications,
U.S.A., U.K: LAP Lambert Academic Publishing, 2009. - Heikki Koivo and Mohammed Elmusrati,
Systems engineering in wireless communications,
Chichester, West Sussex, UK: John Wiley & Sons, 2009.
Sarjajulkaisu, raportti
- Emre Ilke Cosar,
A wireless toolkit for monitoring applications,
Master's thesis, Department of Automation and Systems Technology, Helsinki University of Technology, Espoo, Finland, 2009. (Helsinki University of Technology, Control Engineering, Report 164). - Olli Haavisto,
Reflectance spectrum analysis of mineral flotation froths and slurries,
Doctoral dissertation, Department of Automation and Systems Technology, Helsinki University of Technology, Espoo, Finland, 2009. (Helsinki University of Technology, Control Engineering, Report 163).
Electronic publication - Kalle Halmevaara,
Simulation assisted performance optimization of large-scale multiparameter technical systems,
Doctoral dissertation, Department of Automation and Systems Technology, Helsinki University of Technology, Espoo, Finland, 2009. (Helsinki University of Technology, Control Engineering, Report 162).
Electronic publication - Vesa Hölttä,
Plant performance evaluation in complex industrial applications,
Doctoral dissertation, Department of Automation and Systems Technology, Helsinki University of Technology, Espoo, Finland, 2009. (Helsinki University of Technology, Control Engineering, Report 161).
Electronic publication - Jani Kaartinen,
Machine vision in measurement and control of mineral concentration process,
Doctoral dissertation, Department of Automation and Systems Technology, Helsinki University of Technology, Espoo, Finland, 2009. (Helsinki University of Technology, Control Engineering, Report 160).
Electronic publication - Antti Pohjoranta,
Modelling surfactant mass balance with the ALE method on deforming 2D surfaces,
Licenciate thesis, Department of Automation and Systems Technology, Helsinki University of Technology, Espoo, Finland, 2009. (Helsinki University of Technology, Control Engineering, Report 159).
Lehtiartikkeli
- Mohammed Elmusrati, Naser Tarhuni and Riku Jäntti,
"Performance analysis of random uniform power allocation for wireless networks in Rayleigh fading channels,"
European Transactions on Telecommunications, Vol. 20, no. 4, pp. 457-462, 2009.
Electronic publication - Lasse Eriksson, Timo Oksanen and Kalle Mikkola,
"PID controller tuning rules for integrating processes with varying time-delays,"
Journal of the Franklin Institute, Vol. 346, no. 5, pp. 470-487, 2009.
Electronic publication - Stephen Fox, Tero Jokinen, Niklas Lindfors and Jean-Peter Ylén,
"Formulation of robust strategies for project manufacturing business,"
International Journal of Managing Projects in Business, Vol. 2, no. 2, pp. 217-237, 2009.
Electronic publication - Olli Haavisto and Heikki Hyötyniemi,
"Recursive multimodel partial least squares estimation of mineral flotation slurry contents using optical reflectance spectra,"
Analytica Chimica Acta, Vol. 642, no. 1-2, pp. 102-109, 2009.
Electronic publication - Olli Haavisto and Jani Kaartinen,
"Multichannel reflectance spectral assaying of zinc and copper flotation slurries,"
International Journal of Mineral Processing, Vol. 93, no. 2, pp. 187-193, 2009.
Electronic publication - Vesa Hölttä and Heikki Koivo,
"Quality index framework for plant-wide performance evaluation,"
Journal of Process Control, Vol. 19, no. 7, pp. 1143-1148, 2009.
Electronic publication - Kalle Kantola and Robert Tenno,
"Machine vision in detection of corrosion products on SO2 exposed ENIG surface and an in situ analysis of the corrosion factors,"
Journal of Materials Processing Technology, Vol. 209, no. 5, pp. 2707-2714, 2009.
Electronic publication - Antti Laiho, Sinervo Anssi, Juha Orivuori, Kari Tammi, Antero Arkkio and Kai Zenger,
"Attenuation of harmonic rotor vibration in a cage rotor induction machine by a self-bearing force actuator,"
IEEE Transactions on Magnetics, Vol. 45, no. 12, 5388–5398, 2009.
Electronic publication - Antti Laiho, Kari Tammi : Burakov, Andrej, Antero Arkkio and Kai Zenger,
"A built-in force actuator for active control of lateral rotor vibration in cage induction electrical machines,"
Journal of Sound and Vibration, Vol. 320, no. 3, 496-515, 2009.
Electronic publication - Laiho Antti, Kari Tammi, Juha Orivuori, Anssi Sinervo, Kai Zenger and Antero Arkkio,
"Electromechanical interaction in eccentric-rotor cage induction machine equipped with a self-bearing force actuator,"
Journal of System Design and Dynamics, Vol. 3, no. 4, 519-529, 2009. - Alexander Mendelson and Robert Tenno,
"Electrode kinetics parameters estimation using Zakai equation,"
Journal of Process Control, Vol. 19, no. 10, pp. 1698-1706, 2009.
Electronic publication - Mikael Pohjola, Shekar Nethi and Riku Jäntti,
"Wireless control of a multihop mobile robot squad,"
IEEE Wireless Communications, Vol. 16, no. 1, pp. 14-20, 2009.
Electronic publication - A Pohjoranta and R Tenno,
"A computational multi-reaction model of a Cu electrolysis cell,"
Electrochimica Acta, Vol. 54, no. 24, pp. 5949-5958, 2009.
Electronic publication - Antti Remes and Niina Vaara,
"Applicability tests of the particle size control at the Kemi concentrator,"
Materia, Vol. 1, s. 42-45, 2009.
Electronic publication - Mariaana Savia and Heikki N Koivo,
"Contact micromanipulation - Survey of strategies,"
IEEE/ASME Transactions on Mechatronics, Vol. 14, no. 4, pp. 504-514, 2009.
Electronic publication - Robert Tenno and Antti Pohjoranta,
"Microvia fill process control,"
International Journal of Control, Vol. 82, no. 5, pp. 883-893, 2009.
Electronic publication - Kalevi Tervo,
"Tutkijavierailu Tokyo Denki University:n (TDU) Research Center for Advanced Technologies (RCAT) -yksikköön,"
Automaatioväylä, Vol. 2, s. 48, 2009.
Electronic publication - Jean-Peter Ylén,
"Que sera, sera... (pääkirjoitus),"
Automaatioväylä, Vol. 3, s. 7, 2009.
Electronic publication - Kai Zenger and Antti J Niemi,
"Modelling and control of a class of time-varying continuous flow processes,"
Journal of Process Control, Vol. 19, no. 9, pp. 1511-1518, 2009.
Electronic publication
Esitelmä konferenssijulkaisussa
- Ali Altowati, Kai Zenger and Heikki Koivo,
"Modeling and control design of paralleled DC-DC switching converters,"
in International Conference on Communication, Computer & Power - Proceedings, Sultan Qaboos University, Oman: IEEE, 2009, 6 pp. - Samuel Aulanko and Kalevi Tervo,
"Modeling and evaluation of harbor crane work,"
in SMC 2009 Proceedings, San Antonio, Texas, USA: IEEE, 2009, pp. 869-874. - M Bocca, E. I Cosar, J Salminen and L. M Eriksson,
"A reconfigurable wireless sensor network for structural health monitoring,"
in Proceedings of the 4th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Urs Meier, Bernadette Havranek and Masoud Motavalli (eds.), Zurich, Switzerland: International Society for Structural Health Monitoring of Intelligent Infrastructure; EMPA, 2009, 9 pp. - Emre I Cosar, Maurizio Bocca and Lasse M Eriksson,
"High speed portable wireless data acquisition system for high data rate applications,"
in Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference - IDETC/CIE 2009, San Diego, USA: ASME, 2009, 11 pp. - Olli Haavisto and Heikki Hyötyniemi,
"Reflectance spectroscopy in the analysis of mineral flotation slurries,"
in IFACMMM2009 - Pre-prints of the Workshop on Automation in Mining, Mineral and Metal Industry, Luis Bergh (ed.), Vina del Mar, Chile: IFAC, 2009, 6 pp. - Vesa Hasu and Heikki Koivo,
"Automatic maintenance route planning of large-scale sensor networks,"
in 2009 IEEE International Conference on Computational Intelligence for Measurement Systems and Applications (CIMSA 2009) Proceedings, Hong Kong, China: IEEE, 2009, pp. 18-23. - Heikki Hyötyniemi,
"Humans in loops - a neocybernetic view at complex processes,"
in Automaatio XVIII 2009 - Proceedings, Matti Ketonen (ed.), Helsinki, Finland: Suomen Automaatioseura ry, 2009, 6 pp. - Mirva Jääskeläinen, Veikko Sariola and Quan Zhou,
"Environmental effects on droplet self-alignment assisted hybrid microassembly,"
in IEEE ISAM 2009 Proceedings, Suwon, Korea: IEEE, 2009, pp. 177-182. - Jani Kaartinen, Jari Hätönen and Timo Roine,
"Machine vision of flotation froths with a rapid-prototyping platform,"
in IFACMMM2009 - Pre-prints of the Workshop on Automation in Mining, Mineral and Metal Industry, Luis Bergh (ed.), Vina del Mar, Chile: IFAC, 2009, 6 pp. - Tuomo Kohtamäki, Mikael Pohjola, Jenna Brand and Lasse M Eriksson,
"PiccSIM Toolchain – design, simulation and automatic implementation of wireless networked control systems,"
in Proceedings of the 2009 IEEE International Conference on Networking, Sensing and Control, Okayama, Japan: IEEE, 2009, pp. 49-54. - Pierre Lambert and Quan Zhou,
"Fluidic assembly and capillary forces: modelling, experiments and case studies,"
in SMART SYSTEMS INTEGRATION 2009, Brussels, Belgium: AKA Verlag, Heidelberg, 2009, 8 pp. - A Mendelson and R Tenno,
"Application of Zakai equation in parameter identification of electrode kinetics,"
in Preprints of the 15th IFAC Symposium on System Identification, Saint-Malo, France: IFAC, 2009, pp. 1423-1428. - Alexander Mendelson and Robert Tenno,
"Identification of uncertainties of electrode kinetics using factorized Zakai equation,"
in CACS 2009 - International Automatic Control Conference, Taipei, Taiwan: Chinese Automatic Control Society, 2009, 6 pp. - Faisal A Mohamed and Heikki N Koivo,
"Environmental/economic power dispatch of microgrid using multiobjetive optimization,"
in ICREPQ'09 - International Conference On Renewable Energies And Power Quality, Valencia, Spain: EA4EPQ, 2009, 6 pp. - Juha Orivuori, Laiho Antti, Anssi Sinervo, Kai Zenger and Antero Arkkio,
"Suppression of rotor vibrations of an electric machine at the critical speed by optimal state feedback controller,"
in European Control Conference 2009 - PROCEEDINGS, Budapest, Hungary: EUCA; IFAC; IEEE, 2009, pp. 4344-4349. - Juha Orivuori, Kai Zenger and Anssi Sinervo,
"Active control of rotor vibrations by advanced control methods,"
in ICSV16 Proceedings - Recent Developments in Acoustics, Noice and Vibration, Marek Pawelczyk and Dariusz Bismor (eds.), Krakow, Poland: IIAV, 2009, 8 pp. - Juha Orivuori, Kai Zenger and Timo Virtanen,
"Periodisten häiriöiden aktiivivaimennuksen menetelmät,"
in Automaatio XVIII 2009 - Proceedings, Matti Ketonen (ed.), Helsinki, Finland: Suomen Automaatioseura ry, 2009, 6 s. - Lauri Palmroth, Kalevi Tervo and Aki Putkonen,
"Intelligent coaching of mobile working machine operators,"
in Proceedings of the IEEE 13th International Conference on Intelligent Engineering Systems, Barbados: IEEE, 2009, 6 pp.
Electronic publication - Janne Pietilä and Olli Haavisto,
"Reflectance spectrum based classification of ore,"
in IFACMMM2009 - Pre-prints of the Workshop on Automation in Mining, Mineral and Metal Industry, Luis Bergh (ed.), Vina del Mar, Chile: IFAC, 2009, 6 pp. - Mikael Pohjola,
"Adaptive control speed based on network quality of service,"
in The 17th Mediterranean Conference on Control and Automation proceedings, Thessaloniki, Greece: IEEE, 2009, pp. 784-789. - Antti Remes, Jarmo Aaltonen and Heikki Koivo,
"Soft-sensor estimation of an apatite thickener operation at the Siilinjärvi concentrator,"
in IFACMMM2009 - Pre-prints of the Workshop on Automation in Mining, Mineral and Metal Industry, Luis Bergh (ed.), Vina del Mar, Chile: IFAC, 2009, 6 pp. - Timo Roine, Janne Pietilä, Jani Kaartinen, Peter Blanz and Pertti Rantala,
"Development of a machine vision system to monitor a grinding mill prototype,"
in 12th European Symposium on Comminution and Classification (ESCC 2009) - CD, Espoo, Finland: EFCE, 2009, 12 pp. - Pekka Rossi, Vesa Hasu, Antti Makela and Elena Saltikoff,
"Analysis of convective cells and lightning using tracking methods,"
in World Meteorological Organization Symposium on Nowcasting and Very Short Range Forecasting, Whistler, British Columbia, Canada: WMO, Environment, 2009, pp. 8. - Veikko Sariola, Quan Zhou and Heikki N Koivo,
"Three dimensional hybrid microassembly combining robotic microhandling and self-assembly,"
in 2009 IEEE International Conference on Robotics and Automation - Conference Proceedings, Kobe, Japan: IEEE, 2009, pp. 2605-2610. - Kari Tammi, Antti Laiho, Erkki Lantto, Kai Zenger and Antero Arkkio,
"On convergence problems of adaptive fir filter with lms algorithm,"
in ICSV16 Proceedings - Recent Developments in Acoustics, Noice and Vibration, Marek Pawelczyk and Dariusz Bismor (eds.), Krakow, Poland: IIAV, 2009, 8 pp. - Robert Tenno,
"Dual adaptive controls for linear system with unknown drifting parameters,"
in Proceedings of European Control Conference, Budapest, Hungary: EUCA; IFAC; IEEE, 2009, pp. 412-417. - Kalevi Tervo, Maurizio Bocca, Lasse M Eriksson and Aino Manninen,
"Wireless joystick control for human adaptive mechatronics applications: case trolley crane,"
in Proceedings of the 2009 IEEE International Conference on Networking, Sensing and Control, Okayama, Japan: IEEE, 2009, pp. 19-24. - Kalevi Tervo, Lauri Palmroth and Heikki Koivo,
"Ihmisen toimintaan mukautuvat älykkäät, opastavat ja valmentavat mekatroniset järjestelmät,"
in Automaatio XVIII 2009 - Proceedings, Matti Ketonen (ed.), Helsinki, Finland: Suomen Automaatioseura ry, 2009, 6 s. - Kalevi Tervo, Lauri Palmroth and Aki Putkonen,
"A hierarchical fuzzy inference method for skill evaluation of machine operators,"
in Proceedings of the 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Singapore: IEEE, 2009, pp. 136-141. - Jean-Peter Ylén, Tero Jokinen and Pasi Riihimäki,
"Kokemuksia liiketoimintaprosessien systeemidynaamisesta mallintamisesta,"
in Automaatio XVIII 2009 - Proceedings, Matti Ketonen (ed.), Helsinki, Finland: Suomen Automaatioseura ry, 2009, 6 s.