Automaatio- ja systeemitekniikan laitos

Löytyi 59 osumaa haulle Systeemitekniikka, 1998, järjestettynä julkaisutyypin mukaan.

Sarjajulkaisu, raportti

• H Hyötyniemi,
  Mental imagery: unified framework for associative representations,
  Espoo, Finland: Helsinki University of Technology, Control Engineering Laboratory, 1998. (Helsinki University of Technology, Control Engineering Laboratory, Report 111).
  Electronic publication
• H Hyötyniemi and H Koivo (eds.),
  Multivariate statistical methods in systems engineering,
  Espoo, Finland: Helsinki University of Technology, Control Engineering Laboratory, 1998. (Helsinki University of Technology, Control Engineering Laboratory, Report 112).
  Electronic publication

Lehtiartikkeli

• A Heikkilä and H Koivo,
  "Modular control system with intelligent scheduling,"
  Computers in Industry, Vol. 36, no. 1-2, pp. 75-81, 1998.
• M. S Laurikkala, M. T Vuoti, T. J Huhtelin and H. N Koivo,
  "Paper quality controls by utilizing new consistency measurement capabilities,"
  Pulp & Paper Canada, Vol. 99, no. 7, pp. 50-53, 1998.
• A. J Niemi, J Berndtson and S Karine,
  "Paperirainan mittaus ja säätö märässä päässä,"
  Paperi ja Puu - Paper and Timber, Vol. 80, no. 5, s. 354-359, 1998.
• A. J Niemi, K Zenger, J Thereska and J. G Martinez,
  "Tracer testing of processes under variable flow and volume,"
  Nukleonika, Vol. 43, no. 1, pp. 73-94, 1998.
• Viitamäki P,
  "Paperikoneen lajinvaihtoautomaation kehityssuuntia,"
  Automaatioväylä, no. 4, s. 16-21, 1998.

Artikkeli kokoomateoksessa

• J.-P Ylén and P Jutila,
  "Monivaiheinen pH:n säätöstrategia painopaperin valmistuksessa - MPKT 08,"
  in CACTUS Teknologiaohjelman Vuosikirja 1998, E Alakangas (toim.), Jyväskylä, Finland: VTT Energia, 1998, s. 161-169.

Esitelmä konferenssijulkaisussa

• A Al Khani,
  "Dynamic scheduling and intelligent control of discrete events in complex processes,"
  in 31st ISATA Proceedings - Advanced Manufacturing in the Automotive Industry & Innovation Management, T Roller (ed.), Düsseldorf, Germany: ISATA, 1998, pp. 283-291.
• A Al Khani,
  "Modelling and distributed data classification and management in distributed intelligent control of large scale complex systems,"
  in Proceedings ASI '98 - Life Cycle Approaches to Production Systems; Management, Control, Supervision, Rion, Greece: University of Patras, BIBA, University of Bremen, 1998, pp. 296-302.
• A Al Khani and H Koivo,
  "Intelligent control methodologies forcontrol strategy and control structure selection,"
  in On-Line-Fault Detection and Supervision in the Chemical Process Industries - Preprints, P. S Dhurjati and S Cauvin (eds.), France: IFAC, 1998, p. 8.
• J Berndtson, J Shakespeare, T Huhtelin and H Koivo,
  "Simulation of scanning paper machine measurements,"
  in EUROSIM'98 Simulation Congress - Proceedings, K Juslin (ed.), Espoo, Finland: Federation of European Simulation Societies, 1998, Vol. 1, pp. 124-129.
• I. A Gadoura,
  "Efficient determination methods of static actuating forces for climbing robots,"
  in Profeedings of the IASTED International Conference CONTROL AND APPLICATIONS, M. H Hamza (ed.), Anaheim, USA: IASTED / ACTA Press, 1998, pp. 341-346.
• I. A Gadoura,
  "The kinematic analysis of a hexapod climbing robot,"
  in Proceedings of the Fifth International Conference on Control, Automation, Robotics and Vision - ICARCV '98, Singapore: Photoplates Pte Ltd, Nanyang Technological University, 1998, pp. 1528-1532.
• I. A Gadoura,
  "The simulation of leg design for a hexapod climbing robot: a static approach,"
  in Simulation Technology: Science and Art; 10th European Simulation Symposium - ESS'98, A Bargiela and Kerckhoffs (eds.), Delft, The Netherlands: Society of Computer Simulation International, 1998, pp. 479-481.
• I Gadoura, V Grigore, J Hätönen, J Kyyrä, P Vallittu and T Suntio,
  "Stabilizing a Telecom power sypply feeding a constant power load,"
  in INTELEC '98 - Twentieth International Telecommunications Energy Conference, USA: IEEE, 1998, pp. 243-248.
• I Gadoura, K Heikkinen, K Zenger, P Vallittu and T Suntio,
  "New methods for controller design, analysis, and validation in the design of DC/DC converters,"
  in Proceedings of the 1998 IEEE Nordic Workshop on Power and Industrial Electronics, S Väliviita (ed.), Espoo, Finland: Helsinki University of Technology, 1998, pp. 164-169.
• V Grigore, J Hätönen, J Kyyrä and T Suntio,
  "Dynamics of a buck converter with a constant power load,"
  in Proceedings of PESC'98, Vol.1, Fukuoka, Japan: 1998, pp. 72-78.
• J Herrala and H. N Koivo,
  "Telemanipulator control system - a case study of CERN telemanipulator,"
  in Proceedings ASI '98 - Life Cycle Approaches to Production Systems; Management, Control, Supervision, Rion, Greece: University of Patras, BIBA, University of Bremen, 1998, pp. 260-267.
• H Hyötyniemi,
  "On mental images and 'computational semantics',"
  in Human and Artificial Information Processing, P Koikkalainen and S Puuronen (eds.), Helsinki, Finland: Finnish Artificial Intelligence Society (FAIS), 1998, pp. 199-208.
• H Hyötyniemi,
  "Semantic feature extraction: reader-specific text document classification,"
  in Human and Artificial Information Processing, P Koikkalainen and S Puuronen (eds.), Helsinki, Finland: Finnish Artificial Intelligence Society (FAIS), 1998, pp. 55-60.
• H Hyötyniemi,
  "Structure from data: AI approaches to systems modeling,"
  in Human and Artificial Information Processing, P Koikkalainen and S Puuronen (eds.), Helsinki, Finland: Finnish Artificial Intelligence Society (FAIS), 1998, pp. 31-40.
• H Hyötyniemi and A Nissinen,
  "New simulation tools: towards mastering the explosion of information,"
  in EUROSIM'98 Simulation Congress - Proceedings, K Juslin (ed.), Espoo, Finland: Federation of European Simulation Societies, 1998, Vol. 1, pp. 103-110.
• H Hyötyniemi and P Saariluoma,
  "Simulating chess players' recall: how many chunks and what kind can they be?,"
  in Proceedings of the Second European Conference on Cognitive Modelling, F. E Ritter and R. M Young (eds.), Nottingham, UK: Nottingham University Press, 1998, pp. 195-196.
• H Hyötyniemi and R Ylinen,
  "Modeling of visual froth data,"
  in Preprints of the IFAC Symposium on Automation in Mining, Mineral and Metal Processing 1998, J Heidepriem (ed.), New York: Elsevier Science, 1998, pp. 309-314.
• V.-P Jutila, P Jutila and J.-P Ylén,
  "The measurement and control of the pH of thick deinked pulp,"
  in Proceedings of the 3rd Asia-Pacific Conference on Control and Measurement, C Shen, C Jiang and C Xiong (eds.), Nanjing, Jiangsu, China: China Aviation Industry Press, 1998, pp. 326-330.
• R Jäntti, J Hätönen and Zenger K,
  "PID controller tuning of nonstationary flow processes,"
  in 5th IFAC Symposium on Dynamic and Control of Process Systems (DYCOPS-5), Korfu, Greece, June 8-10, 1998 - Preprints, C Georgakis (ed.), Thessaloniki, Greece: Art of Text S.A., IFAC, 1998, pp. 502-507.
• Koivo H Jäntti R.,
  "Effects of instrumentation system dynamics on PI-controller tuning - a case analysis,"
  in Preprints of the 8th IFAC/IFORS/IMACS/IFIP Symposium on Large Scale Systems: Theory and Applications, N. T Koussoulas and P. P Groumpos (eds.), University of Patras, Greece: IFAC, 1998, Vol. 1, pp. 55-58.
• R Jäntti and H Koivo,
  "On the tuning of the speed controller of the direct torque controlled electrical drive,"
  in Abstracts / 2nd IMACS International Multiconference CESA'98 Computational Engineering in Systems Applications, P Borne, M Ksouri and A El Kamel (eds.), Tunisia: IMACS/IEEE, 1998, p. 106.
• P Kallio, M Lind, Q Zhou and H.N Koivo,
  "A 3 DOF piezohydraulic parallel micromanipulator,"
  in ICRA '98 Proceedings, Leuven, Belgium: IEEE/Omnipress, 1998, pp. 1823-1828.
• P Kallio, Q Zhou and H. N Koivo,
  "Control issues in micromanipulation,"
  in Proceedings of the 1998 International Symposium on Micro Mechatronics and Human Science, Nagoya, Japan: IEEE, 1998, pp. 135-142.
• P Kallio, Q Zhou, M Lind and H. N Koivo,
  "Hall sensor based position measurement system for a parallel micromanipulator,"
  in Proceedings of the ICMA '98, M Kivikoski (ed.), Tampere, Finland: Tampere University of Technology, 1998, Vol. 2, pp. 703-717.
• P Kallio, Q Zhou, M Lind and H. N Koivo,
  "Position control of a 3 DOF piezohydraulic parallel micromanipulator,"
  in Proceedings 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems, USA: IEEE/OMNIPRESS, 1998, Vol. 2, pp. 770-775.
• H Koivo, J.-P Jalkanen and M Välisuo,
  "A Simulink block library for steam turbine simulation,"
  in EUROSIM'98 Simulation Congress - Proceedings, K Juslin (ed.), Espoo, Finland: Federation of European Simulation Societies, 1998, Vol. 3, pp. 480-485.
• H Koivo, R Ylinen and P Sipari,
  "Machine vision research in Control Engineering Laboratory of the Helsinki University of Technology,"
  in Konenäköseminaari - Machine Vision Seminar 26.-27.5.1998, Innopoli, Espoo, Finland, Helsinki, Finland: Suomen Automaatioseura ry, Vision Club of Finland, 1998, pp. 61-61 (abstract).
• J Laakso, R Jäntti, M Rinne and O Salonaho,
  "Radio resource knapsack packing for WCDMA air interface,"
  in The 9th IEEE international symposium on personal, indoor, and mobile radio communications PIMRC'98, Boston, Massachusetts, USA, September 8-11, 1998, IEEE, 1998, p. 5.
• T Laine, H Hyötyniemi and P Saariluoma,
  "Foundations of simulative theorizing,"
  in Proceedings of the 13th Biennial European Conference on Artificial Intelligence ECAI'98, H Prade (ed.), New York, USA: John Wiley & Sons, 1998, pp. 109-113.
• M Lind,
  "Modelling a bellows with beam-like component in ADAMS,"
  in EUROSIM'98 Simulation Congress - Proceedings, K Juslin (ed.), Espoo, Finland: Federation of European Simulation Societies, 1998, Vol. 3, pp. 513-519.
• M Lind, P Kallio and H. N Koivo,
  "Linear motion miniature actuators,"
  in Proceedings of the ICMA '98, M Kivikoski (ed.), Tampere, Finland: Tampere University of Technology, 1998, Vol. 1, pp. 297-309.
• S Menani, H. N Koivo, T Huhtelin and R Kuusisto,
  "Dynamic modelling of paper machine from grade change data,"
  in Control Systems '98 - Information tools to match the evolving operator role, R Ritala (ed.), Helsinki, Finland: Suomen Automaatioseura ry, 1998, pp. 79-86.
• A. J Niemi, J Berndtson and S Karine,
  "Improved wet end control of the paper machine,"
  in Control Systems '98 - Information tools to match the evolving operator role, R Ritala (ed.), Helsinki, Finland: Suomen Automaatioseura ry, 1998, pp. 371-378.
• A. S Nissinen and H Hyötyniemi,
  "Evolutionary self-organizing map,"
  in 6th European Congress on Intelligent Techniques and Soft Computing - Proceedings, Aachen, Germany: ELITE, 1998, Vol. 3, pp. 1596-1600.
• A. S Nissinen, H Hyötyniemi and H Koivo,
  "Evolutionary SOM for generation of classifier maps,"
  in Proceedings ASI '98 - Life Cycle Approaches to Production Systems; Management, Control, Supervision, Rion, Greece: University of Patras, BIBA, University of Bremen, 1998, pp. 240-245.
• A Nissinen and H Hyötyniemi,
  "Evolutionary training of behavior-based self-organizing map,"
  in Proceedings of IJCNN '98, FUZZ-IEEE '98, ICEC '98, USA: ALTEC/IEEE, 1998, pp. 660-665 (on ICEC '98 CD-ROM).
• M Puonnas and H Koivo,
  "Action model of tuning of controllers in a paper mill,"
  in Control Systems '98 - Information tools to match the evolving operator role, R Ritala (ed.), Helsinki, Finland: Suomen Automaatioseura ry, 1998, pp. 282-288.
• Robert Tenno, Ander Tenno and Hannu Paulapuro,
  "Stochastic control for a large-scale wastewater treatment system,"
  in Proc. 7th International Conf. and IFAC Symposium on Computer Applications in Biotechnology. Osaka, 1998, 547-554.
• Z Uykan, C Guzelis, M. E Celebi and H. N Koivo,
  "Analysis of input-output clustering for determining centers of RBFN,"
  in Proceedings of The Seventh Turkish Symposium on Artificial Intelligence and Neural Networks, I Cicekli and H. A Guvenir (eds.), Ankara, Turkey: Bilkent University, 1998, pp. 71-80.
• Z Uykan and H. N Koivo,
  "Augmented-input-layer RBFN,"
  in Proceedings of the International ISCS/IFAC Symposium on Neural Computation (NC'98), M Heiss (ed.), Canada/Switzerland: ICSC Academic Press, 1998, pp. 989-994.
• Z Uykan and Koivo H. N,
  "Clustering of regressors for constructing radial basis function networks,"
  in Proceedings of SCI' 98 - World Multiconference on Systemics, Cybernetics and Informatics, N Callaos, H. H Yu and A Carcia (eds.), Orlando, Florida, USA: IIIS, 1998, Vol. 3, pp. 741-748.
• P Viitamäki,
  "Static simulation of steam pressures in paper machine grade changes,"
  in EUROSIM'98 Simulation Congress - Proceedings, K Juslin (ed.), Espoo, Finland: Federation of European Simulation Societies, 1998, Vol. 1, pp. 145-149.
• P Viljamaa and H. N Koivo,
  "Comparison of minimum and product operators in fuzzy systems with more than two inputs,"
  in Profeedings of the IASTED International Conference CONTROL AND APPLICATIONS, M. H Hamza (ed.), Anaheim, USA: IASTED / ACTA Press, 1998, pp. 69-73.
• J.-P Ylén,
  "Improved performance of self-organising fuzzy controller (SOC) in pH control,"
  in Proceedings of IJCNN '98, FUZZ-IEEE '98, ICEC '98, USA: ALTEC/IEEE, 1998, pp. 258-263 (on FUZZ-IEEE '98 CD-ROM).
• J.-P Ylén,
  "pH-value and the dynamic chemical state of wet end,"
  in Measurement & Control of Papermaking - Pira International conference proceedings, UK: Pira International, 1998, p. 22.
• R Ylinen, H Hyötyniemi, E Ikonen and U Kortela,
  "A new Hebbian type learning algorithm applied to sensor fusion,"
  in COSY Annual Joint Workshop 1998, Ohrid, Macedonia: ESF, 1998, p. 9.
• T Ylöstalo and H Hyötyniemi,
  "Maps of process dynamics,"
  in EUROSIM'98 Simulation Congress - Proceedings, K Juslin (ed.), Espoo, Finland: Federation of European Simulation Societies, 1998, Vol. 2, pp. 225-229.
• K Zenger and J Orava,
  "Analysis and controller design of linear differential systems by using time-varying variable transformations,"
  in Profeedings of the IASTED International Conference CONTROL AND APPLICATIONS, M. H Hamza (ed.), Anaheim, USA: IASTED / ACTA Press, 1998, pp. 117-121.
• K Zenger and J Orava,
  "Modelling and analysis of linear time-varying differential systems by Lyapunov transformations,"
  in EUROSIM'98 Simulation Congress - Proceedings, K Juslin (ed.), Espoo, Finland: Federation of European Simulation Societies, 1998, Vol. 3, pp. 520-525.
• Q Zhou, P Kallio, M Lind and H. N Koivo,
  "A real-time control software architecture for microtelemanipulator systems,"
  in Proceedings of the ICMA '98, M Kivikoski (ed.), Tampere, Finland: Tampere University of Technology, 1998, Vol. 2, pp. 681-690.

Tietokone-ohjelma

• P Kallio, M Lind, Q Zhou, I Alavalkama and H. N Koivo,
  Software: Video Demonstration of a 3 DOF piezohydraulic parallel micromanipulator,
  1998.